January 22, 2019
Description
This is a modification of the original case to accomodate a PiCap LED control hat for the Raspberry Pi.
Main modifications include:
When printing, do separate the connected meshes and make sure both are dropped to the print bed (I'll do this eventually and upload the changes).
Assembly requires 4x #4 3/4" screws. Use these instead of the provided bolts with the PiCap and screw them into the bottom plate.
You must detach the screw post connectors for power and LEDs before fitting the top case. It is a snug fit. Reattach the connectors once the case is closed up.
License:
Creative Commons - Attribution
gpvillamil
