Railcore II PanelDue 5i Enclosure

This is a remix of wwendorf"s wicked awesome Panel Due 7i Enclosure for the Railcore II 300ZL corexy 3D printer. Needed a 5i version, I know wwendorf has been working on a 5i version but just couldn't wait.
All parts are the same except the following which are 5i specific:
Main_case.stl
TiltOutTray.stl
PanelDue_5i_Cover.stl

I just added an option that you can print a new front side panel for the electronics box.
It incorporates the lower hinges so no need to drill out holes in the electronics box side panel to bolt the lower hinges on and veng1's slot to allow access to the USB and SD card slot.

There are two versions of the side panel too.
One with a hole to install a aluminum dual QC3.0 USB outlet to supply power to added devices like a Wyze cameras.
Front_side_panel_w_USB_ElectronicsBox.stl
and one without the hole.
Front_side_panel_without_USB_ElectronicsBox.stl

Hardware List:

• 8 M3 x 10 button head bolts (for mounting the upper hinges to the 5i base)
• 4 M3 x 10 button head bolts (for securing the 5i cover to the base)
• 4 M3 x 6 button head bolts (for mounting the 5i screen to the 5i cover)
• 8 M3 x 14 button head bolts (not needed if using
  Front_side_panel_w_USB_ElectronicsBox.stl or
  Front_side_panel_without_USB_ElectronicsBox.stl)
• 8-16 M3 Lock nuts
• 8-16 M3 flat washers (optional)
• 8-9 M3 x 4mm OD x 5mm L Amazon used to mount the 5i to the cover and to secure the cover to the main case. (the 5th insert for mounting the 5i screen to the cover is optional.