LM2596 Buck Converter Tslot,Vslot update

A small case to protect and secure a buck converter. Specifically an LM2596 DC-DC voltage converter. The internal screw posts will take M2 6mm bolts. May need to be drilled out with a 1/16th drill bit.

Print in PETG to give the clips that hold the lid on some flex and interlayer adhesion.

Remix: Redid the case in Fusion 360 to add another mounting ear to have it secure to two points to reduce twisting. Added a couple other tweaks while I was at it.

UPDATE November 9 2019 - Added a .3MF file with a version of the case with alternate mounting hole positions for LM2596 modules that seem to be prevalent but have flipped holes compared to the original case.