February 1, 2019
Description
Hi, these are the parts I used to make this printer my own.
Some non-standard things I've added:
These parts are partly to accomodate that, but I think also to make the X mount a little beefier. The 8mm rod clamps, for example are to make the sensorless homing stop in the right place.
For the 8mm clamps, they are 10mm tall, IIRC. Just scale the Z to how long you need them.
For the PTFE holder, this holds 3mm PTFE and mounts to the back of the printer in the corners. I think this is for the upper left, and the upper right needs to be mirrored. You'll need longer #6-32 or M4 screws.
The BL mount attaches to the bottom of the Extruder mount, and it's only really helpful if you have a longer e3d v6.
License:
Creative Commons - Attribution
Jeffeb3
