Summary

Most filament guides for 2020 rails don't fit the Creality CR-X which has two top endcaps to support the dual Z-screws.

I remixed Keith Corcoran's design to rotate the 2020 clip 90 degrees and then shorten the height of the whole thing to 2.5 cm.

I then horizontally mirrored the whole assembly for the opposite side guide (so both curve backwards).

Application requires a firm snap into place then a slide to the desired height. Because of the snap install, you might need to increase number of perimeters for PLA or use a filament with some give.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>CR-X</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>15%</p></div></p>                                                    <strong>Filament:</strong>   PLA                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>Use 1 or 2 extra perimeters than normal default</p></div>

2020 Snap-on filament guide - CR-X

2020 Snap-on filament guide - CR-X

Related Models