This is miniature stove for doll house (main dimensions: 70 x 60 x 100 mm).
You need to print:
1x stove_front.STL
1x stove_box.STL
4x knobGasket.STL
4x knob.STL
1x oven_door.STL
1x oven.STL
1x oven_grate.STL
1x stove_grate.STL
1x torch_S.STL
2x torch_M.STL
1x torch_L.STL
1x pot.STL
1x pot_M
1x pan
I use Zortrax filament Z-ABS
You need also:
1x small nail or
1x large paper clip to make a hinge in the door.
rigid foil (eg from a transparent dust jacket) to make a glass in the oven door
Use pliers to trim nail or paper clip in places where it protrudes.
Cut foil into the oven door so that it fits tight.
I didn't use glue because parts fits tightly, but if you need to, use it only to connect:
oven_door with cut foil and stove_box with stove_front
This is a
link to all miniature furniture for dollhouse I've designed so far.
Mewalela
