Shifter for Thrustmaster and Logitech G25,G27,G29 (Ets2 and Ats)

NEW UPGRADED VERSION V4, with engine brake switch, check it out here! : https://www.thingiverse.com/thing:6893912

Shifter for Thrustmaster TH8A and Logitech g25,G27 and G29.
Works with Euro Truck simulator 2 and American Truck Simulator.

Update 23.06-22 Made the top from the V2 shifter fit the v3 shifter it's called "V3 Alternative top"

Update 11.06-22 Made a version 3 of the shifter with a changable top, the instructions are in the google drive link below, select "v3 Thrustmaster and Logitech". I recommend you to print the parts with 0.12mm layer height for a nice finish.

Added some more logos to the v2 shifter, Ford, International, Western Star and Freightliner.

Added a version for 15mm toggle buttons for both logitech v2 and thrustmaster v2

Added more logos to v2 shifter: Volvo, DAF, Renault, Iveco, MAN, Mercedes-Benz, Peterbilt and Kenworth.

version 2, the holes for the switches is 6 mm but if you have a different size, send me a message.
I made the shifter into two pieces to reduse the ammount of supports needed. Also made a logo at the top, wich is cangable.

Link to the instructions below.

https://drive.google.com/drive/folders/1UzKrgutozpCLwmPU0USqf4H4UFTaf2UM?usp=sharing

To make the shifter for Thrustmaster v2 you need:
Three m4x25 Screws
one m10 nut
Three m4 nuts
Sheet metal screws, I used M3,5x19 (m4 screws should also work)
Two on-on mini toggle switches or on off momentery switch, depending on how you wire it.
The last thing you need is a usb encoder interface of some sort in order to make the switches work in the game.

To make the shifter for Logitech v2 you need:
Three m4x25 Screws¨
Three m4 nuts
Two on-on mini toggle switches or on off momentery switch, depending on how you wire it.
The last thing you need is a usb encoder interface of some sort in order to make the switches work in the game.