Summary

Shim I designed to use standard 130 size motors in the hyperfire conveyor gearbox. I designed cut outs on the sides for for the vents in the OOD Valkyrie. However, ended up using an old Rhino which isn't vented on the sides.

Use at your own risk. Not responsible for damage or injury that may result.

Print Settings

Printer Brand:

Prusa

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>i3 MK3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>none</p></div></p>                                                    <strong>Filament:</strong> eSun PETG                Grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I added a brim because that seems to give a little more bed contact. The I had a fair bit of sagging on the vent cut-out bridge which I trimmed (not very carefully) post print.</p></div>

Post-Printing

Disclaimer

            <div><p>Use at your own risk. I am not responsible for damage or injury that may result. </p></div>

Nerf Hyperfire 130 motor shim

Nerf Hyperfire 130 motor shim

Related Models