KFB 2.0 Controller Case

This is a simple and robust housing for a KFB 2.0 Controller.
It will coincidentally fit as a controller housing on a Renkforce RF500 (it was originally designed with this printer in mind).

Measurements:

• housing approx. 114x149x75mm (with mounted fan)
• 4 mounting holes provided (for 4-5mm screws): hole distance x=87mm and y=117mm

Please refer to the mockup for further information and assembly.

Additional parts needed:

• 80mm fan with 8 mounting screws
• 4 x 3x8mm screws to mount the KFB 2.0 board
• 4 x 3x8mm screws if you optionally want to fasten the cover (it is designed to be snap-on)