CR10S filament sensor top of enclosure

I wanted to put the CR10S filament sensor on top of my enclosure that I build myself. I could not find anything suitable so I remixed the design https://www.thingiverse.com/thing:2875859 to a simple but yet very effectief top filament sensor holder.

• You simple remove the sensor PCB out of the standard CR10S filament holder by removing the 3 screws in it
• Then you reuse these screws to screw together the new one
• Drill a hole of 10mm diameter in the top plate, and press the sensor holder in it from the top
• From the bottom you can press the grommet in it (this avoids pieces of wood dust contaminating the inside of the enclosure)
• In case you are wondering, as spool holder I am using the "ultimate spool holder" : https://www.thingiverse.com/thing:2047554 and this works beautifully together
• I designed everything for a top plate of 18mm (the pressed in portion is 9mm for both the top and bottom part)