WORK IN PROGRESS
All opinions are welcome!
Cura profiles available for printing in PLA or PETG.
PETG is HIGHLY recommended if you live in a hot region.
This is a FPV Flying Wing designed in CATIA v5 and inspired on the design of the Proteus Wing - https://www.thingiverse.com/thing:2086413
Dimensions:
- Span - 1260 mm
- Fuselage Length - 420 mm
- Root Chord - 180 mm
Weight of printed parts: around 600g
Specs:
- Wing airfoil - Martin Hepperle MH60 10.08%
- Winglet airfoil - Selig S9033 7.5%
- Carbon spar dimensions - 5.5 x 5.5 x 492 mm (1/5 x 1/5 x 19 1/3 inches)
- The motor mount is made to accept a 2830 Brushless Outrunner motor with a 9 inches propeller
CG position - 258 mm from the nose
Cruise speed estimated at 10-11 m/s (aprox. 23 mph or 36 km/h)
CG position - 250 mm from the nose
Cruise speed estimated at 14-15 m/s (aprox. 31 mph or 50 km/h)
March 12, 2019:
- Uploaded version 2 of Fuselage01, Fuselage03 and RightWing01
- Fuselage01 is now printed with much less support
- The spar hole was enlarged from 6mm x 6mm to 6.5mm x 6.5mm
March 26,2019
- Uploaded GCODES for Fuselage01 and Hatch
March 28, 2019
- Uploaded GCODES for Wing03 and Winglets
- RightWing01 split in 2 pieces: FrontRightWing01 and BackRightWing01
April 13, 2019
- Major remodeling for best printing experience
- Winglets enlarged
- Firewall angle modified from 3º to 5º
- All parts rolled to version 3
- Removed old GCODES and made cura profiles available
April 17, 2019
- First prototype assembly completed
CDninja
