FPV camera holders for 2.2 servo v1

These are for 2.2g servos.
My suggestion is to print in TPU at 60% infil so you can force wrap the edges around the FPV camera.
If you print in PLA you will need to break the top holder and slot the camera in.

This will fit in a 2.2 servo that should be upright in the "passenger seat"
If you are lacking the space for the whole mount just cut the side tabs and a bit of the top and either hot glue the camera to back part of the holder or use an elastic (if the camera is getting too hot and melting off the hot glue).