Summary

A simple petsfang mount to hold the SN04 inductive sensor for bed levelling, this design does not restrict the X axis in any way.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>Ender 3</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>Any, I did mine in 0.3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>100%</p></div></p>                                                    <strong>Filament:</strong> Generic  PLA, ABS, PETG,                Red

Custom Section

The only other mounting system for the SN04 (dirty cheap by the way and really accurate if you have a metal bed) had the adjustment screw and this pushed the whole design back to the point it would collide with the end bolts on the Ender 3's X axis, so I made this as a simple screw on with the petsfang mount and then two m3x20 bolts will self tap into the mount and hold the SN04 in place, it takes a little "tinkering" to get the height right but once its set, its done forever.

SN04 Petsfang mount (no loss of X axis width)

SN04 Petsfang mount (no loss of X axis width)

Related Models