洞板容差測試組_Tolerance Test Calibration Hole and Pillar

※洞板容差測試組

1.填充密度至少25%↑

建議底面向上列印

避免因為第一層擴張

而產生線寬誤差

2.方柱圓柱上皆有標示

三角向上標示為Y+方向

藉由改變測試方向和標示

可以知道X軸Y軸的各別誤差量

願耶穌基督祝福你，有個美好的一天

※Tolerance Test Hole Calibration

1. Infill: 25%↑

Do upside down printing which is recommended

for avoiding the first layer expansion.

1. There are triangle marks pointing to Y+

on the pillars for knowing the direction,

that you can know the difference between

X and Y axes by changing pillar angle.

Have a good day, Jesus Christ bless you.