OpenRC 1:10 RC Differential (Redesigned, Higher Tolerance)

Had a lot of trouble getting the square pegs to fit in the gears with the 0.1mm tolerances and the small points on the small gears are almost too detailed for a 0.4mm and the last layer would ooze, so I removed the small points and increased the tolerances to 0.2mm.

Also added 0.1mm to the height of the spur and bevel gears and the housing for the small gears so they can be used together or mixed-and-matched with the originals if the gears are too tight with the original assembly.

EDIT: Added some more variations for the heights. Didn't bother with using Meshmixer to properly merge them this time, doesn't affect slicing.