Cubiio Print Stand

I needed a way to print to things that are fairly large. The Cubiio screen is much too big. It is also quite expensive. I created my own.

This is a 150mm stand which will provide a work space of 100mm x 100mm.
The inside near the bottom contains markings at 10mm intervals to help to line things up.

I envision that I will paint the inside black. I use my Cubiio with Certified OD 7+ safety glasses. See below for a link to the glasses I use.

Update 3/15/19: Printed Version 1 of this. I learned a few things and redid the files. I will reprint it. I did have a few sizes slightly off, also i did not do a good job of properly constraining my sketches which lead to some funny corners. This next version is hopefully perfect. the laser rides the edges almost perfectly when running a 100mm x 100mm square test pattern. Hopefully the new unit will be near exact.

Cubiio -

http://cubiio.muherz.com/

https://www.amazon.com/Cubiio-Most-Compact-Laser-Engraver/dp/B07BHC53N6

https://www.amazon.com/gp/product/B07K7HDT5S

Safety Glasses -

https://www.safetyglassesusa.com/nl-arg.html