Lanyard Chain and Badge Kit open and closed loop options

This is a 3d Printable lanyard chain and badge holder.

You'll need a really well calibrated print bed for this print - but don't fear, it is easier than you think.

A PLA make should break if snagged on something (for your protection) at around 10 pounds of force - and that will vary based on your printer, your settings, material, humidity, and alignment of Jupiter.

It looks great with "Silky" style filaments.

Print at 0.1 to 0.2 layer thickness with 3 to 4 shells and 20% infill.

You can pick either the open loop design and print the joiner ring to connect them, or you can print the closed loop design and just snap the clip over top.

To summarize:

1. Open Design:

• print "RectangularChainNecklace09.STL"
• print "SimpleClip04.STL"
• print "LinkJoinerforNecklaces05.STL"

1. Closed Design:

• print "RectangularChainNecklace10_closedLoop.STL"
• print "LinkJoinerforNecklaces05.STL"