Waveshare GameHAT Case with Magnetic Battery Door

I've included configurations for the Pi 3B/3B+ and the ZeroWH (must be the version WITH headers, or you need to solder on your own headers). There are versions for each Pi with and without a magnetic battery door (needs 8x3mm disc magnets). There are also version of the 3B/3B+ style with and without extra ventilation on the back cover. I know they get hot, and it's possible the side vents won't always be enough.

All of these files are for the hardware version with the round peg shoulder buttons and the relocated power switch (I believe this is version 2 of the hardware). If yours has the newer square shoulder buttons, you will need to do some modifications before printing.

The ZeroWH version has extra flares on the sides to accommodate the Mini HDMI adapter cable that will be necessary to make this version work. I used this one: https://www.amazon.com/gp/product/B01HQ2H2S2/ and had to trim some of the rubber around the head of the cable off with a razor blade to make it fit. No wiring was exposed when doing this mod.

Uses 6 M3 5mm standoffs internally (get these off amazon) and the original included screws for assembly. Print the 5mm standoff wrench I designed and assembly will be 1000X easier.

Changes from the original: Re-aligned all of the holes and pegs, reinforced the pegs, added SD card access slot, added optional magnetic battery door, re-aligned the screen opening and removed the 5mm gap, reworked button labels, removed rounded edges so top could be printed face down (saving time and filament), created side menu buttons for easier display and volume control.