UPDATE: After 80-100 miles of use it appears that road cracks, speed bumps, cobbles and the ridiculous amount of knobled paving placed at pedestrian crossings has taken it's toll. Both my front and rear lights suffered stress fractures and broke off. To fix this issue I've released the V3 files which have increased the overall thickness of the spacer to 2.5mm and I've added fillets to the light mount bore joint to prevent stress fractures from forming. Hopefully this will fix the problem. Please Use the V3 files.
This is an LED light mount for skateboards, primarily designed for E-SK8's but will work on any longboard/skateboard with standard fitting trucks. It is built around CatEye ORBs but any LED light with a similar mounting system should work. Please see the video for further info.
RISER MOUNTS:
Print in supplied orientation for highest strength, printed flat will give you a weak part prone to failure.
Material: ABS - other plastics will work but choose something durable
layer height: 0.2mm
temp: 225C
Fan: 30%
Speed: 60mm/s
supports: Yes
Print Time: 3:30
BORE MOUNT
Must be printed in a flexible material, PLA/ABS will not work. You will need to reduce/increase scaling percentages to match your mounts. The bore mount should fit "snug" but should not take undue effort to fit.
Material: Generic TPU
Layer Height: 0.2mm
temp: 190C
Fan: 100%
Speed: 30mm/s
Support: no
print time: 30mins (for pair)
jonnyg30
