OpenScan Tough - Photogrammetry Turntable

This is a "tougher" version of the brilliant OpenScan 3d Scanner designed to withstand a shared fabrication lab environment. It remains fully compatible with the original electronics and arduino sketch. Changes include:

• 608zz bearings at axis of rotation
• 8mm bolts with nylon locknuts for axle
• Removal of all press-fit parts
• Brass heat-set inserts for all threading
• Reinforcement of printed parts

In addition to the printed parts, you will need the following:

• 6x: M3 x 0.50 mm Brass Heat Set Inserts Link (McMaster-Carr)
• 6x: M3 x 0.5mm x 10mm Button Head Screw Link (McMaster-Carr)
• 2x: M8 x 1.25 mm x 65 mm Hex Head Bolt Link (McMaster-Carr)
• 2x: M8 x 1.25 mm Nylon Locknut Link (McMaster-Carr)
• 2x M8 Washer Link (McMaster-Carr)
• 4x: 608zz Ball Bearings Link (Folger Tech)

You can replace the M8 bolts, locknuts and washers with 5/16" hardware.