March 28, 2019
Description
Handles to suit a Coldsteel SlimStick - which is no longer produced but seems ot be available on ebay etc.
Added FRITZ* variants - apparently PISTOL isn't the right name for this style. So when I altered the dimensions on it I opted to upload the new ones with the correct name. PISTOL is probably ok for smaller hands, the FRITZ should be better for larger hands.
2019-06-07 Updated FRITZ (better grip on middle fingers, generally more comfortable)
Note: FRITZ can use printed LUGS to dowel the two sides together (prior to gluing), or can optionally use 10x16mm magnets, for use with a metallic/magnetic belt plate... or whatever convenient ferrous object you want to stick it to.)
Not sure how strong these will be, all except the longest grip should be fine, I have printed and will eventually be using the pistolgrip, so I guess I'll find out.
I used PLA and 3+mm walls with 50%+ infill, none of the stl are oriented for printing. You'll need to do that. Supports should not be required for any.
iirc the part that inserts into the top of the cane is slightly too big on a few models, but I forget which. Knife/sand/file that off.
Related: the bolt used varies, and some contain magnet's as replacement to printed dowels, or in combination with dowels:
License:
Creative Commons - Attribution - Share Alike
BETLOG
.jpg&w=256&h=256&output=webp&q=100&n=40&default=https://cdn.thingiverse.com/assets/84/8a/af/6a/5b/1526170_1375918039400540_6059107188587688027_n(3).jpg "barspin profile image")
