March 30, 2019
Description
This is a leg used to support long graphic cards so they don't bend.
There is a printable screw so the card can be between 8.8 cm to 10 cm from the bottom of the case.
A pocket has been created in the bottom part for a small magnet to keep the leg in place. It is designed for magnet with a diameter of 5mm and a thickness of 3mm. Alternatively, the hole can accommodate a piece of rubber or silicone.
The lettering is designed to be printed by multicolor capable devices like the Prusa Multi Material Unit or the Mosaic Palette. Letters can also be discarded to have an etched effect. I printed mine with glow in the dark filament for a nice touch
There are 2 slightly different screws, you can use the "Thicker" version if you have a printer that is more precise and want a tighter fit.
License:
Creative Commons - Attribution
Milhooz
