March 31, 2019
Description
Just a quick remix of the exhaust system.
I don't really like using supports for large/detailed areas, so I used Meshmixer to slice the exhaust system into multiple parts, then glued together afterwards. I also took the exhausts into Fusion360 and added a hole to make them look more realistic.
STLs are correctly orientated, ready for printing.
Print the following;
x1 "unterwotnot" (with supports)
x1 "filter_L"
x1 "filter_R"
x4 "exhaust" (print these with a brim and go slow. I printed at 10mm/s).
Everything was printed at 100μm layer height using a 0.4mm nozzle.
License:
Creative Commons - Attribution
MattRigg
