iPhone 4 4s Horizontal Tripod Mount

This is a sort of remix of http://www.thingiverse.com/thing:251813, but really just inspired by it.

I printed out the thing in http://www.thingiverse.com/thing:251813, but it didn't fit my iPhone 4s. It also curled badly on my Replicator 2X with ABS plastic. Plus, I didn't want to have to hold the 1/4-20 nut in every time I attached the mount to my tripod.

So I made this mount.

The features of this mount are:

o Straight "extrusion" print, so no overhang or support issues
o Has hold-down pads on the corners already in the model to keep it from curling up during printing...just trim them off with an Xacto knife after it is printed
o Fits an iPhone 4 and 4s like a glove, and snaps on with just enough force to hold it steady
o No need for a 1/4-20 nut...just thread the hole with a 1/4-20 tap or a bolt if you don't have a tap. Then it screws right on to a standard tripod.

Enjoy!