SCUM BCU-2 WIP

Hi,

i wanted to challenge myself and learn more about Fusion360 in the progress,
so i tried to build a 3d printable replica of the BCU-2 from the survivalgame SCUM.

It is build from scratch by me, with the original as template.
The design has still a lot of flaws, but it is a WIP, an EA-design so to say :D

Under one of the small bridging elements is a 3mm hole for wires to light the BCU with some LEDs. The batterycompartment will be the next addition.

I have seen other people designing and rebuilding things from other games, so
I did this because i like SCUM really a lot and there wasn't any available.

If there is some problem with copyright or such, please contact me, so i could take it down.
Because that is the last thing i would want, to cause any kind of trouble.

Maybe someone likes / could use it :)

// Update 2019/04/18, 01:15am:
added POC 1/2
printed on Anet A8, .25mm nozzle, .12mm layer height,
Kaisertech PLA white

// Update 2019/04/19, 06:31am:
added the last POC, hinged version.
Settings and PLA like in the other POCs

Only the first, solid version/model is available for download.
The other two versions (hollow rigid / hollow hinged) are exclusively reserved.

Pictures of my prints are only published for the purpose of proving that the design is easily printed, even on my badly maintenanced and poorly calibrated Anet A8.
(mostly stock except the .25mm nozzle, a glass bed and another fanduct(which is not needed))