April 23, 2019
Description
15 degree trailcamera wallmount for Stealthcam model STC-PX36NG V2
Print backside down with and logo facing up and use support for rod. (Touching Buildplate)
I made this for mounting my trailcamera outside my house for security.
Use fitting bolt or small lock at rod end hole to prevent camera slide off.
Layer Height: 0.2
Addnorth Petg filament: 245C and 80 for buildplate
Printing speed: 30mm/s top and bottom 20mm/s
License:
Creative Commons - Attribution
ragulves
