X-Carriage for Bondtech Prusa Extruder MK2.5(+MK2.5S Add-on) (Revised X-Axis)

X-Carriage compatible with the MK2.5(S) Bondtech Prusa Extruder with the Revised X-axis

---

Compatible ONLY with the Revised X-axis or Bear X-ends

---

---

IMPORTANT: This carriage is compatible with stock frame only if you use "X-Carriage Back_Top 1.02S (MK) (Stock Frame)".
Assembly note for stock frame: Make sure to have the correct orientation when installing the X Carriage Back Top (StockFrame), the cutouts should be facing upwards.

---

---

This is a small edit to the existing MK3 remix I did, please consult this post for more details about assembly, BoM, credits etc.

In case you are swapping parts around (MK2.5-MK3), the only parts that are different and version specific are: X-Carriage and X-Carriage-Back Bottom. The files affected have appropriate name tags.

---

**If you prefer to have the cutout for the "old" optical sensor (MK2.5) closed on the X-carriage, I've added a version ONLY compatible with the MK2.5S add-on **

---

X-Carriage-Back has two versions, although I recommend using this one, it allows access to all screws that secure the extruder, making assembly a bit more convenient.

---

STEP files are included for your modding pleasure and convenience. STL files were sliced and checked with Slic3r PE. Any constructive feedback is welcomed.

---