DJI Inspire 1 Clone (alternative canopy)

Work in progress... (place holder, will add more soon)

Remix of CDRSkulls epic Inspire drone.

It started out as just a canopy design and has now morphed into this . . .

The original design asked that users go buy the original DJI canopy and print CDR's Inspire guts/internals. Searching for a 3D printable DJI canopy proved problematic. Designs existed but many lacked the features and more importantly the structural integrity needed.

To avoid any patent/copyright issues, this design is an alternative design I came up with that adds many of the features i wanted. I do not believe this will work with the original DJI inspire, but if anyone has one for more to test or design off of . . i'd be more than happy to take the drone off your hands ;)

-Structurally sound (thicker wall structure)
-Beefed up the bottom plate, significantly
-Support for front gimbal
-Gimbal tested is a HAKRC gimbal . . . but believe other gimbals could be used
-Ability to add 2 batteries (in parallel) for higher capacity (6S design)
-Rear Hardpoints for VTX
-Canopy has grid of hard points to add additional sensors/gear
-Canopy has ability to add dedicated forward facing camera (for camera switching)
-Dedicated (High) GPS Mount
-Supports 15.5in blades

More to come . . .