April 18, 2019
Description
Didn't need to be able to rotate the pointers, so I use math to decide the angle! Decided to go with a separate ring for the set screws to prevent air leakage.
The old SCAD nozzle (by erpel09) was hitting the vent, so I made it shorter. And tweaked some of the math.
NOTE I haven't tested this yet.
License:
Creative Commons - Attribution
brandroid64![Air Assist for Diode Lasers [33x33mm] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/0e/c7/3f/d9/83/IMG_0493_small.JPG&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/0e/c7/3f/d9/83/IMG_0493_small.JPG&w=292&h=219&fit=contain&cbg=white&n=-1 "Air Assist for Diode Lasers [33x33mm] preview image")
![Air Assist for Diode Lasers [40x40mm] preview image](https://wsrv.3dprinterfiles.com/?url=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/ca/1c/86/39/8c/Laser_40x40_Air-Assist_s2.jpg&w=292&h=219&fit=contain&cbg=white&n=-1&w=640&h=640&output=webp&q=100&n=40&default=https://resize.thingiverse.com/?url=https://cdn.thingiverse.com/assets/ca/1c/86/39/8c/Laser_40x40_Air-Assist_s2.jpg&w=292&h=219&fit=contain&cbg=white&n=-1 "Air Assist for Diode Lasers [40x40mm] preview image")
