Raspberry Pi 3 B/B+ w/ PoE Hat Chassis

Hello all,

I took 0110-M-P's design and altered it to use the screws in the Pi itself, instead of extrusions for different screws, while also removing the VESA mount as I didn't need that. I made sure there was enough room for the fan and cabling. I also took a moment to put a Pi logo on there for dual extrusion configs, but you could print it without the insert to get a recessed Pi logo as well.

I personally didn't need the GPIO headers accessible for this, but if anyone wants those added, feel free to let me know and I'll make those models as well. I wouldn't be surprised to eventually need that myself, so I will probably add them eventually. For now, I use this as a network diagnostic tool I can just throw in my bag to testing and lab configs.

The PoE hat I used came with the appropriate standoffs for the Pi and screws. This model is designed with M2.5 screws in mind, and does not screw into itself, but those standoffs.

I hope this can help someone out. Thanks for taking a look.

UPDATE 4/30/2019: I re-positioned/resized the logo so as not have it interfere with the camera cutout. I also uploaded versions with and without the logo and with and without each of the two cutouts as well as with GPIO for more specific builds. If you want a more specific set of cutouts, let me know.