Sega Dreamcast GD2SD / GDEMU Tray (The original design)

This is a tray I made for the Dreamcast and the GD Optical Drive Emulator. It has been available to buy on Shapeways for a long time, but now I am making it available on here for people with 3D printers.

Note that I have never printed this out on a FDM printer, so you do this at your own risk as I will not take responsibility for any damage to a Dreamcast. The images you see are from a commercial SLS Print. You may need to print this with supports, and I would do a 100 percent infill for strength, and print ideally at less than 0.2mm layer height and in ABS if possible. The SD extension cables are available on Amazon and eBay, and you will need 5 screws in total unless you permanently glue this in place.

I can tell you that this tray when printed properly works very well, and I use it on my Dreamcasts, it also does not restrict airflow as some other designs do. So try printing it out and have fun. Oh and please subscribe to my channel at www.youtube.com/10p6

10p6, all rights reserved.

Note a lot of people are copying this design, or basing their design off this one. That is OK but make sure you credit 10p6 and shapeways.com/shops/10p6 or a copyright claim will be filed. This design has been on the official GDEMU site for a very long time. This is the original design which has been copied by others who are making a huge profit from it whilst giving no credit to this at all, and trying to make people believe that they designed it, they did not. Using a larger button, or changing the design slightly does not make it their design.