Summary

Bought some new idler pulleys for my printer https://www.amazon.com/gp/product/B07NT2LTRF/ref=ppx_yo_dt_b_asin_title_o01_s00 and found that while it fit in the Y-belt tensioner it didn't fit in freemark's X-belt tensioner. So I took freemark's design and remade it with a bigger pulley slot, as well as adding a hole for the pulley screw and nut to make it easier to assemble and to compensate for making it a bit wider. All 3 holes are sized for M3 screws.

Print Settings

Printer:

Anet A8

                                            <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.2mm</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>40%</p></div></p>                                                    <strong>Filament:</strong> Dikale PLA                Gray                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I always print at least 2-3 walls and 1mm top-bottom thickness for strength and at least 2mm brim for bed adhesion.</p></div>

Anet A8 X-Belt Tensioner Wide

Anet A8 X-Belt Tensioner Wide

Related Models