My Star Wars D-O droid build designed to fit Ender 3 (23x23x25cm) size printbeds.

It's still in the Beta stage. The wheel and side panels are OK but some internal mechanics may be changed in a few days. I will update these files frequently.

Special thanks for DavidOx21. I've used his files as a template.
If you are planning a static build, I'm strongly recommending his work. https://www.thingiverse.com/thing:3559890

For more information please join our Facebook group

NOTES

• tire_ring_left.STL >>> file is also the Right ring. I didnt draw another ring for the right side.
• tire_bumps.STL >>> print 2pcs for the both sides.
• Sand paper, 3mm and 6mm Drill bits required due to tight references.
• You can use CA glue to attach tire rings, bumps and big gear to the structure.

BOM List

• 2x MG14 mini servos
• 2x Mini Digital Servo (for the head)
• 6x 3x3x6mm bearings(inner diameter, width,outer diameter)
• 6x 3x4x10mm bearings with flange.
• 50x M3 8mm dome head hex screws.
• 3mm carbon fibre rod (at least 300mm)

FILE UPDATE SUMMARY

+UPDATE (15-05-2019)
Cone.STL Updated
Back Plate Head_Thin.STL Updated

+UPDATE (5-05-2019)

Axle_90.STL Updated
head_counterweight.STL Updated

+UPDATE (5-05-2019)

pan_tilt_1.STL Added
pan_tilt_2.STL Added
pan_tilt_3.STL Added
box_ankle.STL Added
Head_Grill.stl Added
Back_Plate_Head_Thin.STL Added
Box.STL Updated and name changed from Box_out.stl

• First Upload (28-04-2019)

VIDEOS (Please Subscribe)

https://www.youtube.com/watch?v=5M4HQVyz1Fg

https://www.youtube.com/watch?v=xBbceQ4vHUU