NRK Labyrint Livspuck

The lifepuck from the norwegian TV-show "Labyrint".

Printed in two parts, with the glass beeing printed in some transparent material.
The glass just pops in place, and stays there. No need for glue.

Assembly requires the following:
1 x CR2032 or 2025

1 x CR2032 or 2025 holder (for easy swapping battery)
OR
Some electrical tape around the battery and the cables

1 x Green LED (or colour of you wish)

Some wires

An RC on/off-switch or similar (see link)

1. Drill two small holes in the middle of the "crater"
2. Insert LED in holes
3. Solder wires for switch and holder
4. Put together

Link for switch
https://www.aliexpress.com/item/D-D-100Pcs-lot-3-Pin-PCB-2-Position-1P2T-SPDT-Miniature-Slide-Switch-Side-Knob/32832574667.html?spm=a2g0s.9042311.0.0.27424c4d0bDdc5

Link for battery holder
https://www.aliexpress.com/item/10PCS-Battery-Button-Cell-Holder-Socket-Case-CR2032-battery-holder-2032/32819924096.html?spm=a2g0s.9042311.0.0.27424c4dTToe1n