May 1, 2019
Description
This is a customizable whoop camera mount for different AIO cameras. Print in TPU or some other flexible material. The camera should hold very tight just by friction fit (hundreds of packs without it moving) if you want to be extra safe, add a zip tie around the lens protectors.
The following cameras are supported:
Through the customizer you can adjust the angle and many more different things - it allows you to customize the mount to fit your specific camera. I recomment to print the default one and then go from there.
The available STL's are for the previously mentioned cams with 30 degree up-tilt.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
.png&w=256&h=256&output=webp&q=100&n=40 "stylesuxx avatar")
stylesuxx
