May 1, 2019
Description
Hi,
HydroAlpha is a fast hydroplane rc boat project.
the boat lenght is: 50 cm
Now is still in development so stay tuned for update!
----03/05/2019-----
Printed the 2 lateral parts, easy no support required:
maded in pla
10% infill cube quarter
2 perimeter
0.3 layer
maybe next time will try 5% infill, anyway the pieces looks strong and lightwheight (100gr each)
used epoxy glue to stick the parts togheter (very easy)
*note: after i tested CA Glue and for pla works lot better!
-----------05/05/2019------------
Printed all! look very nice but the cover need some fix because is really boring to fit.
perfect floating!.
----------08/05/2019-----------
Added a new version of cabin with 8mm shaft tube hole and supports
Ok now need to wait for electronic parts,
i will try with:
-2845 brushless 5900kv liquid cooled
-150A esc liquid cooled
-2s lipo
-10kg servo
and hardware:
-3mm shaft
-8mm shaft-tube with bearings
-universal joint
-35mm propeller
-tube and nozzles for cooling
-75mm rudder (maybe i design one but i think metal is better)
and i think its all!
look my other rc boat:
https://www.thingiverse.com/thing:3725323
https://www.thingiverse.com/thing:3710644
License:
Creative Commons - Attribution - Non-Commercial
lelex673
