3s 18650 pack for fpv goggles

I got tired of my skyzones alarming at 50% of li-ions' capacity and powering off (~6.9v)

3s works good, just set the powersource to 2s or dc-in and watch out for the end voltage, it will be something like 9.5v. Mine shows reading +0.1v under load, so check yours with a voltmeter, before you decide when to power it off at.

NOTE: it is a nonseparable pack. You have to solder the cells and use glue to assemble the case!

!!!!!!!!!!!!!!Printing notes!!!!!!!!!!!!!!!!

Suggested materials:
Grommet - any flexible
Other parts - any hard plastic, i prefer ABS - acetone solution fuses everything together nicely

Upscale up_cap , cap, bottom_cap to 101%, otherwise it wont slide on the core part.
You can print all these 3 parts at once.