Made a few modifications to Blinkingsun's FT-6 mods along with a modified parts cooler originally designed by Michael Foegelle on GrabCad.
- Y-Tensioner - Adjustment screw hole re-sized from 3.1mm to 2.89mm
- Dual Bowden Mount - Removed lower brace and sized holes smaller for M3 throughbolts. Also sized the upper M4 holes to 3.9mm from 4.0mm
- Belt Side - Resized belt hold down holes to 2.9mm from 3.1mm
- Parts Cooler - Made mount same thickness as lower brace that was removed from hotend mount and adjusted mount holes for proper placement.
- Gantry Board Clip - Adjusted clips for easier installation/removal of board.
Printing last parts tonight and will be testing soon.
FourDogs
