Hexadecibel r10.11 | Anycubic Linear Plus Acrylic Enclosure

What Are You Doing?
I'm currently designing an enclosure, using 210*597mm acrylic panes. Theoretically, you could use 4 A4 panes or a every long panel except for the front two (the doors).

There is a 2020 style extrusion profile on the beams so that you can mount things using t nuts. You don't have to tighten them much to get them to bolt on.

Please comment any feedback. r[X] is the revision number of the thing.

Here's The Timeline
[¬ = Updated, + = Added, - = Removed, ! = Currently being designed]

[14 April 2021] (r10.11)

• [+] Added acrylic panel height information

[25 November 2020] (r10.1)

• [¬] Updated all STL Files.
• Pushed that off for far too long considering it took almost no time at all.
• [¬] More recent cover photo

[23rd June 2020]

• [+] Added step file

[21st June 2020] (r10)

• [¬] Renamed Hexadecibel
• [¬] Corrected Fusion 360 Source File
  • Corrected corner bracket alignment
  • Cleaned up file
  • Other adjustments
• [ ! ] The new stl files haven't been uploaded yet

[8th May 2020]

• [¬] Renamed HexaDecimal
• [¬] Added r9 (revision 9) to the title
• [¬] Changed filtration device
• [ ! ] Realigning corner brackets

[10th Feb 2020]

• [¬] Officially named HexaDecibel

[15th Oct]

• [+] Added LED ring to BOM list
• [¬] Hinge

[25th Sep]

• [+] Fusion 360 Source File
• v58 has a few issues but should be fine for most uses.

[21st Sep]

• [+] Bottom Cover
• [¬] Hinge
• [¬] RGB Screen Holder
• [¬] Bottom Corner Front
• [¬] Top Corner Front
• [¬] Top Corner Back

[10th September]

• [¬] Print list to correlate with names of the files.

[22 August]

• [¬] Feet - Added extrusion profile

[16 July]

• [+] Door clip

[22 June]

• [+] Images of Stage 1/3 complete
• With 2 being the spool holder and 3 being the lighting and filtration systems
• [¬] Bottom Corner Back
• [¬] RGB LCD holder

[21 June]

• [¬] Feet
• [¬] Top Front Corner
• [-] Bottom Corner Base
• [¬] Top Front Tile
• [¬] Hinges

[20 June 19]

• [¬] All existing files (had to be redesigned twice)
• [+] Remaining files needed for the main enclosure part of the project
• [Not fully printed and tested]

[12 May 19]

• [+] Created Thing
• [¬] Top Corner Front
• [+] Font Beam Middle

Print List
Main Prints:

• 2 Back Beam and 1 Back Beam Middle
• 4 Front Beam (mirror 2 for other side) and 2 Front Beam Middle
• 1 Bottom Corner Front, 1 mirrored Bottom Corner Front and 1 Bottom Corner Back (same for top)
• 1 Filament Guide (to insert short PTFE)
• 3 Bottom Tiles
• 2 Top Tiles and 1 Front Top Tile
• 2 Bottom Tile Top and 1 Front Bottom Tile
• 1 Fysetc RGB LCD screen holder if you have one
• 3 Bottom Covers

Other Prints:

• Effector cover, wire harness and 5015 fan holder: https://www.thingiverse.com/thing:3898076
• Tensioners: https://www.thingiverse.com/thing:3155015
• 25cm Glass Holder: https://www.thingiverse.com/thing:3303881
• Motor Covers: https://www.thingiverse.com/thing:3625644
• Other Feet: https://www.thingiverse.com/thing:3625464
• SKR holder: https://www.thingiverse.com/thing:3685481

Parts List
Main Enclosure

• Quite a lot (100pcs should be ok) of 8mm M4 bolts and t-nuts: https://ebay.us/cgqGtb and https://ebay.us/MUGbMK
• 6 21x59.7cm 3mm panes, but you may want to get 60cm (or the distance between the bottom and top extrusions - 1 or 2mm) if you're not going to be sealing the edges: https://plasticonline.co.uk/cut-to-size-plastic/acrylic-sheet/acrylic-sheets.html
• You should also be able to use 8 A4 3mm panes for the back panels
• 33ft/10m Car U Shape Seal: https://ebay.us/f0RQQN
• 20mm square rubber adhesive feet

Light, Filter and Filament Holder (coming soon):

• 1 20cm diameter 3mm thick acrylic disk. Opal or frosted.
• 2 6" / 6.3" 5V LED rings

Printer Configuration

• Control Board upside down so that the PSU can be mounted on the back. Print https://www.thingiverse.com/thing:2941653 for cooling.
• Alternatively, you could extend the wires from the PSU, or mount it on one of the the front towers.
• FYSETC RGB LCD Screen (I'm using a BIQU SKR so I can use a graphical display)