Plotter ver 2

Plotter version 2

Material:

• Arduino Uno R3
• GRBL Shield V3
• 2 Stepper Motor 1.8 degree
• 2 Stepper Driver A4988
• Tower Pro SG90 9g Micro servo

Setup

• Download Arduino IDE from https://www.arduino.cc/
• Install and Open Arduino IDE
• Import MIGRBL.zip to libraries: Sketch > Include Library > Add .ZIP Library...
• Selected MIGRBL.zip to import
• Connect Arduino Uno R3 via USB cable, select File > Examples > MIGRBL > grblUpload
• Select correct information for board from Tools:
  Board: "Arduino/Genuino Uno"
  Port: USB port for Arduino Uno
  Programmer: "AVRISP mkll"
• Click to button Upload

Gcode Editor Tools Setup

• Download and setup Inkscape version 0.48.5 (https://inkscape.org/release/inkscape-0.48.5/)
• Unzip tools/MI Inkscape Extension.zip and copy all of file to inkscape extensions folder
  MAC: ~/.config/inkscape/extensions/
  WINDOW: ...

Gcode Sender Tool

• GRBL Controller: https://github.com/zapmaker/GrblHoming/releases

Demo

• https://www.youtube.com/watch?v=Rj0R-PmCwWo

Download All in One

• https://github.com/diy3dvn/grbl-plotter