( This is a new version v2 ,now with big chamfered
edges to get it to be more aesthetic looking
the old one you can get here :
https://www.thingiverse.com/thing:3252444 )
If you found this design very helpful or otherwise wish to support me ,you can buy me a cup of coffee ( helps keeping the brain active so i can create new stuff ) ;-) ,then please
consider using this link :
Changed my Cr-10s to accept SD card (instead of the micro SD )
via an adapter from china .
Instead of having the cable and SD housing laying dangling
by the side of the control unit ,i decided to make a housing perfectly holding it all .
First i would have used the housing that the SD adapter came with ,
but found out that it was very easy to split apart ,
so i could make a more smooth SD card insert in the case that
i made to screw onto the side of the control unit.
The 2 original screws can be used to hold this adapter case in place .
It should not be necessary to print with support ,but you could use support
for the holes to the screws.
The design is meant to be printed laying flat on the large surface with
the SD Card symbol down onto the heatbed .
Link to the Micro SD to SD card from china :
https://www.aliexpress.com/item/TF-Micro-SD-TO-SD-Card-Extension-Cable-Adapter-Flexible-Extender-MicroSD-To-SD-SDHC-SDXC/32735363715.html?spm=a2g0s.9042311.0.0.27424c4dH40Lt5
8orge
