Foxeer Box 2 Mount for Wizard x220

Printed using Esun Eflex (TPU is probably better) 0.2mm layer hight with brim

04.07.19 - Update - added FoxeerBox2Mount.stl - 25 degrees angle , attach using the 4
front screws of the frame , Cut the thin integrated support at the front after printing.

07.07.19 - Update - added FoxeerBox2Mount_Noscrews20deg.stl - 20 degrees angle , designed for Velcro strap attachment,
Cut the thin integrated support at the front after printing.

Printed using TPU 0.6mm layer hight with brim .
Hotend :volcano e3d 0.8mm nozzle

15.07.19 Update - added FoxeerBox2Mount_Noscrews20degA.stl - 20 degrees angle , designed for zip-tie attachment,
Cut the thin integrated support at the front after printing.

Printed using TPU 0.6mm layer hight with brim .
Hotend :volcano e3d 0.8mm nozzle