CCP Dash Button

This is a remix of the "WIFI Kit 32 Case" by snwilson58 https://www.thingiverse.com/thing:3527010 .
The CCPDashButton is a case for an ESP32 with an OLED display that, in my case, is programmed to act as a dash button.
When the key is pressed a production grade kubernetes cluster is provisioned in my lab through the Cisco Container Platform.
Checkout the project on GitHub: https://github.com/fdiniro/CCPDashButton

The case comes in two flavors: with a "k8s" sign on the button and with plain button.
In both case the button is a different object so if you have a dual extrusion printer, you can print the button in a different color, perhaps using the same of the case like I did.

If you have a printer that makes a "fat" initial layer you should set to -0.2 / -0.4 the "Initial layer horizontal expansion" setting to compensate for it, otherwise with the low tolerances in the button you may end up with the button welded with the cover.

I printed at 0.2 layer on an Ultimaker 3, in PLA at 210° and everything was nearly fine.
You may want also to play with the flow if you have "beefy" layers, in my case a 96% flow worked better.

May 31st update:

I went through some iterations to optimize the coupling between the base and the cover that was not perfect with my print. Version 6 is the best one so I updated the files.
Version 6 enhancements:

• created a recess in the cover to better couple and grip with the base
• moved the button arm so to not touch the display
• widened the opening for the USB connector to ensure that the connector may be plugged in entirely
• the base is now 1.5 mm taller to hold also 1000mA batteries