May 22, 2019
Description
I designed this switch box for my Prusa lack table enclosure to control my fans and lights in the enclosure. The box base can be screwed down to the enclosure base and then the box installed on the base after wiring. You will need to drill wire entry and exit holes to match your wiring needs. I drilled one small hole in the with a power supply pigtail and drilled a larger hole down through the base and into the printer enclosure for the fan and light wiring.
Additional Parts Needed:
2 toggle switches
M3 bolts
M3 hex nuts
License:
Creative Commons - Attribution
mckenzr
