CR-10S Pro Filament Strain Relief

This is a small filament strain-relief adaptor that takes the Creality CR-10S Pro's filament sensor housing as a base.

---

Updated:

Improved the clips of the Housing Box (V3). Made those wider.
Tested the model.
Print it standing with supports to make the clips stiffer.

---

Updated:

Added another version of the housing box, which doesn't require the quider.
The extending log is prepared to accomodate the edge of capricorn tube, in case someone is using a storage box for a filament, and is guiding the filament out the box by a tube.
In addition, added some clips for better attachment.

I didn't test the design. Any comments are appreciated.

---

It is made of 2 parts:

1. A housing box, which has to be installed on the sensor enclosure.
2. A relief guider that should be attached to the housing box. The guider has to be pushed on the circular extender.

The guider has an opening to accommodate the 4mm bowden tube, in case it is used as a full leader from the filament roll. The tube can be easily pushed and pulled from the opening.