Crocodile Prusa Edition

The friend of your printer
Assembly
Step 1 - Tools necessary for this chapter

• Needle-nose pliers for magnets
• 2.5mm Allen key for M3 screws
  Step 2 - preparing the components
• Prepare following parts to build the crocodile:
• Printed parts (6x), use PET-G, 0.2mm, 15% infill, no supports
• M3x40 screw (2x)
• M3n nut (2x)
• 10x6x2mm magnet (2x, optional)
• 20x6x2mm magnet (1x, optional)
• 8mm steel ball (2x, optional)
  Step 3
• Insert two M3n nuts into the crocodile`s right hand and leg
• Connect two body parts and secure via hands and legs with M3x40 screws, don`t use excessive force.
• Dont mix left and right hands and legs, otherwise youll have one ugly crocodile ;)
• Insert 20x6x2mm magnet into the slot as shown, use Allen key to align the magnet inside the slot
• Insert two 10x6x2mm magnets into slots on the upper side of the head
• Insert two (eye)balls into holes, they will be held by the magnets
  Installation
  Place the crocodile onto the top of one of the Z-axis-tops using existing hex hole

It`s Haribo time!

Usage
*Store some frequently used tools into jaws, hands and maybe on the tail of the crocodile

• Enjoy!