Satellite from Cave in Jupiter

Satellite modeled after artwork from the band "Cave In" on their Jupiter Album.

(Recommended for printing) "190525 satellite pieces.stl" this model is laid out in pieces so there are minimal supports required. The pieces are the body, engine and base. The antennas are strong carbon fiber rods that can be found in the links below and must be cut to size.

3mm carbon fiber rods, cut to 40mm
https://amzn.to/2YNSyL8

1.5mm carbon fiber rods, cut to 46mm
https://amzn.to/2HGhcrn

printed with WYZworks PLA 1.75mm Gray
https://amzn.to/2YQe6Xw

(Not recommended for printing) 190520satellite.stl model is the full model with 3d printed antenna. Antenna's may be too brittle and a large amount of supports maybe required.