June 3, 2019
Description
Pegboard mounting brackets for numerous tool types designed to work with the Sealey Metal pegboard solution: https://www.sealey.co.uk/product/5637184563/steel-pegboard-pack-of-2
I doubt these will work with any pegboard that is more than 1mm thick as all of the objects are designed to clamp tightly onto the Sealey Pegboard whcih is 1mm thick steel!
Please ensure that you have properly calibrated your material for shrinkage before printing as these designs require a high level of printing accuracy to fit properly.
Included in the pack is:
*** New for 2021 ***
WERA Long Screwdrivers
WERA ClickTorque A5
WERA ClickTorque B2
WERA Zyklops Ratchet Set (1/4, 3/8, 1/2)
Shorter Extension Bar Set
*** 2019 Release ***
230mm Stud Extractors v3
230mm Hole Cutters (Step Drills)
*** Original Release ***
120mm Container V2
230mm Back Plate v1 (use for testing or to make your own designs)
230mm Container
230mm Half Inch Sockets
230mm Quarter Inch Sockets
230mm Three Eights Sockets
250mm Half Inch Sockets V3
250mm Quarter Inch Sockets V3
250mm Three Eights Sockets V3
Ball Joint Seperator v3
Hacksaw Holder v2
Heater Remote Holder v2
Knife Holder v2
Large Deep Spanner v1
Large Ratchet v1
Large Spanner V3
Large Torq Wrench V3
Medium Ratchet V3
Medium Deep Spanner v1
Medium Spanner V3
Plyers Rack
Pry Bars v2
Ratchet Bars V3
Screwdriver Rack v4
Small Deep Spanner v1
Small Hook v2
Small Spanner V3
Small Spanner
Torch Holder v2
All designs have a flat bottom to allow for good bead adhesion and nothing requires supports or rafts. Just put the flat surface on the bed and print!
Enjoy!
License:
Creative Commons - Attribution
14
jabawokjayuk
