June 6, 2019
Description
I designed this because on my Dennerle Nano Cube the original hose clip of my Tunze Osmolator nano didn't fit without lifting the lid.
So I made a thing which needs only 5mm clearance between the top and side glass.
Just press fit the hose into the holder and fix it with a cable tie.
if you are frightened of the hose may fall out, you can use a drop of hot glue to keep it there.
Then use the screw to fix the assembly to the aquarium glass (max. 5.5mm)
Use the holder_in for 0.25in hose and the holder_mm for the 6mm
have fun :-)
I designed this as part of my Aquarium mod series:
published project parts so far:
License:
Creative Commons - Attribution - Non-Commercial
uepsie
