CR-10 Cable extension box (16mm connector version)

16mm connector EXYZ cable box for the Creality CR-10(S)

This is a GX16-6 connector remix of my original cablebox that uses GX12-6 connectors
For more details go to https://www.thingiverse.com/thing:2914015

The cable box is designed with a self locking top and is to be used with the cable box clips. For now I have only made T-nut versions of the 16mm boxes.

3D component list:

Modell name Description
CR-10_Cablebox_t-nut_4connector_16mm_v1.stl t-nut box with 4 holes (CR-10)
CR-10_Cablebox_t-nut_5connector_16mm_v1.stl t-nut box with 5 holes (CR-10S)
CR-10_Cablebox_t-nut_6connector_16mm_v1.stl t-nut box with 6 holes
CR-10_Cablebox_top_16mm_EXYZ_v1.stl Top for CR-10
CR-10_Cablebox_top_16mm_EXYZ1Z2_v1.stl Top for CR-10S (dual Z axis motors)
CR-10_Cablebox_top_16mm_EFXYZ1Z2_v1.stl Top for CR-10S with separate filaments sensor connector
CR-10_Cablebox_top_16mm_E1E2XYZ1Z2_v1.stl Top for CR-10S with dual extruder

Details about the difference between the tops

CR-10_Cablebox_top_16mm_EXYZ_v1.stl: Standard top for CR-10 (need 4 connector box)
CR-10_Cablebox_top_16mm_EXYZ1Z2_v1.stl: Standard top for CR-10S with dual Z-axis motors, need to use a GX12-7 Pin connector for the extruder and filament sensor on E connector (for 5 connector box)
CR-10_Cablebox_top_16mm_E1E2XYZ1Z2_v1.stl: Standard top for CR-10S with dual extruder and dual z-axis motors, need to use two GX12-7 Pin connectors one for each extruder and filament sensor on E1 and E2 connector (for 6 connector box)
CR-10_Cablebox_top_16mm_EFXYZ1Z2_v1.stl: Top for CR-10S with dual Z axis motors but uses separate GX12 connector for Extruder and for filament sensor (for 6 connector box)

Purchased component list for CR10 version (4 connectors):

Description Quantity
GX16-6 Pin Female connector 4
GX16-6 Pin Male Chassis Panel 4
Contact housing JST PH 6pin 2mm 4
Contact crimp terminal PH 20-30 AWG 16
Contact housing JST XH 3pin 2.5mm 3
Contact crimp terminal XH 22-28 AWG 6
Signal cable unshielded 6x22mm2 3m
M4 screw 8mm (for t-nut version) 3-4
M4 t-nut (for t-nut version) 3-4